Code Search for Developers
 
 
  

glibconfig.h from EmStar at Krugle


Show glibconfig.h syntax highlighted

/*
 *
 * Copyright (c) 2003 The Regents of the University of California.  All 
 * rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 *
 * - Neither the name of the University nor the names of its
 *   contributors may be used to endorse or promote products derived
 *   from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS''
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
 * PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
 * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */
 

/* glibconfig.h
 *
 * This is a generated file.  Please modify 'configure.in'
 */

#ifndef __G_LIBCONFIG_H__
#define __G_LIBCONFIG_H__

#include <glib/gmacros.h>

#include <limits.h>
#include <float.h>
#define GLIB_HAVE_ALLOCA_H
#define GLIB_HAVE_SYS_POLL_H

G_BEGIN_DECLS

#define G_MINFLOAT	FLT_MIN
#define G_MAXFLOAT	FLT_MAX
#define G_MINDOUBLE	DBL_MIN
#define G_MAXDOUBLE	DBL_MAX
#define G_MINSHORT	SHRT_MIN
#define G_MAXSHORT	SHRT_MAX
#define G_MAXUSHORT	USHRT_MAX
#define G_MININT	INT_MIN
#define G_MAXINT	INT_MAX
#define G_MAXUINT	UINT_MAX
#define G_MINLONG	LONG_MIN
#define G_MAXLONG	LONG_MAX
#define G_MAXULONG	ULONG_MAX

#define G_MININT64	((gint64)  0x8000000000000000)
#define G_MAXINT64	((gint64)  0x7fffffffffffffff)
#define G_MAXUINT64	((guint64) 0xffffffffffffffff)

typedef signed char gint8;
typedef unsigned char guint8;
typedef signed short gint16;
typedef unsigned short guint16;
#define G_GINT16_FORMAT "hi"
#define G_GUINT16_FORMAT "hu"
typedef signed int gint32;
typedef unsigned int guint32;
#define G_GINT32_FORMAT "i"
#define G_GUINT32_FORMAT "u"
#define G_HAVE_GINT64 1          /* deprecated, always true */

G_GNUC_EXTENSION typedef signed long long gint64;
G_GNUC_EXTENSION typedef unsigned long long guint64;

#define G_GINT64_CONSTANT(val)	(G_GNUC_EXTENSION (val##LL))
#define G_GINT64_FORMAT "lli"
#define G_GUINT64_FORMAT "llu"

#define GLIB_SIZEOF_VOID_P 4
#define GLIB_SIZEOF_LONG   4
#define GLIB_SIZEOF_SIZE_T 4

typedef signed int gssize;
typedef unsigned int gsize;

#define GPOINTER_TO_INT(p)	((gint)   (p))
#define GPOINTER_TO_UINT(p)	((guint)  (p))

#define GINT_TO_POINTER(i)	((gpointer)  (i))
#define GUINT_TO_POINTER(u)	((gpointer)  (u))

#ifdef NeXT /* @#%@! NeXTStep */
# define g_ATEXIT(proc)	(!atexit (proc))
#else
# define g_ATEXIT(proc)	(atexit (proc))
#endif

#define g_memmove(d,s,n) G_STMT_START { memmove ((d), (s), (n)); } G_STMT_END

#define GLIB_MAJOR_VERSION 2
#define GLIB_MINOR_VERSION 0
#define GLIB_MICRO_VERSION 6

#define G_OS_UNIX

#define G_VA_COPY	va_copy

#ifdef	__cplusplus
#define	G_HAVE_INLINE	1
#else	/* !__cplusplus */
#define G_HAVE_INLINE 1
#define G_HAVE___INLINE 1
#define G_HAVE___INLINE__ 1
#endif	/* !__cplusplus */

#ifndef __cplusplus
# define G_HAVE_ISO_VARARGS 1
#endif
#ifdef __cplusplus
# define G_HAVE_ISO_VARARGS 1
#endif

/* gcc-2.95.x supports both gnu style and ISO varargs, but if -ansi
 * is passed ISO vararg support is turned off, and there is no work
 * around to turn it on, so we unconditionally turn it off.
 */
#if __GNUC__ == 2 && __GNUC_MINOR__ == 95
#  undef G_HAVE_ISO_VARARGS
#endif

/* turning off ISO VARARGS */
#  undef G_HAVE_ISO_VARARGS

#define G_HAVE_GNUC_VARARGS 1
#define G_HAVE_GROWING_STACK 0


#define G_THREADS_ENABLED
#define G_THREADS_IMPL_POSIX
typedef struct _GStaticMutex GStaticMutex;
struct _GStaticMutex
{
  struct _GMutex *runtime_mutex;
  union {
    char   pad[24];
    double dummy_double;
    void  *dummy_pointer;
    long   dummy_long;
  } static_mutex;
};
#define	G_STATIC_MUTEX_INIT	{ NULL, { { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0} } }
#define	g_static_mutex_get_mutex(mutex)   (g_thread_use_default_impl ? ((GMutex*) &((mutex)->static_mutex)) :    g_static_mutex_get_mutex_impl (&((mutex)->runtime_mutex)))
/* This represents a system thread as used by the implementation. An
 * alien implementaion, as loaded by g_thread_init can only count on
 * "sizeof (gpointer)" bytes to store their info. We however need more
 * for some of our native implementations. */
typedef union _GSystemThread GSystemThread;
union _GSystemThread
{
  char   data[4];
  double dummy_double;
  void  *dummy_pointer;
  long   dummy_long;
};

#define GINT16_TO_LE(val)	((gint16) (val))
#define GUINT16_TO_LE(val)	((guint16) (val))
#define GINT16_TO_BE(val)	((gint16) GUINT16_SWAP_LE_BE (val))
#define GUINT16_TO_BE(val)	(GUINT16_SWAP_LE_BE (val))
#define GINT32_TO_LE(val)	((gint32) (val))
#define GUINT32_TO_LE(val)	((guint32) (val))
#define GINT32_TO_BE(val)	((gint32) GUINT32_SWAP_LE_BE (val))
#define GUINT32_TO_BE(val)	(GUINT32_SWAP_LE_BE (val))
#define GINT64_TO_LE(val)	((gint64) (val))
#define GUINT64_TO_LE(val)	((guint64) (val))
#define GINT64_TO_BE(val)	((gint64) GUINT64_SWAP_LE_BE (val))
#define GUINT64_TO_BE(val)	(GUINT64_SWAP_LE_BE (val))
#define GLONG_TO_LE(val)	((glong) GINT32_TO_LE (val))
#define GULONG_TO_LE(val)	((gulong) GUINT32_TO_LE (val))
#define GLONG_TO_BE(val)	((glong) GINT32_TO_BE (val))
#define GULONG_TO_BE(val)	((gulong) GUINT32_TO_BE (val))
#define GINT_TO_LE(val)		((gint) GINT32_TO_LE (val))
#define GUINT_TO_LE(val)	((guint) GUINT32_TO_LE (val))
#define GINT_TO_BE(val)		((gint) GINT32_TO_BE (val))
#define GUINT_TO_BE(val)	((guint) GUINT32_TO_BE (val))
#define G_BYTE_ORDER G_LITTLE_ENDIAN

#define GLIB_SYSDEF_POLLIN =1
#define GLIB_SYSDEF_POLLOUT =4
#define GLIB_SYSDEF_POLLPRI =2
#define GLIB_SYSDEF_POLLERR =8
#define GLIB_SYSDEF_POLLHUP =16
#define GLIB_SYSDEF_POLLNVAL =32

#define G_MODULE_SUFFIX "so"

G_END_DECLS

#endif /* GLIBCONFIG_H */




See more files for this project here

EmStar

EmStar is a software system for developing and deploying wireless sensor networks involving Linux-based platforms. As the wireless sensor network community has attempted to deploy more complex designs---large-scale, long-lived systems that need self-organization and adaptivity---a number of difficult software design issues have arisen. Advances in software design have not kept pace with the capabilities of hardware. This is because designing for an adaptive, efficient, and useful sensor network has turned out to be surprisingly complex and difficult. EmStar is a Linux-based software framework, whose goal is to dramatically reduce this complexity, enabling work to be shared and reused, and simplifying and speeding the design of new sensor network applications.

Project homepage: http://cvs.cens.ucla.edu/emstar/
Programming language(s): C,Shell Script
License: other

  glib/
    galloca.h
    garray.h
    gasyncqueue.h
    gbacktrace.h
    gbsearcharray.h
    gcache.h
    gcompletion.h
    gconvert.h
    gdataset.h
    gdate.h
    gdebug.h
    gdir.h
    gerror.h
    gfileutils.h
    ghash.h
    ghook.h
    giochannel.h
    glib-object.h
    glibintl.h
    glist.h
    gmacros.h
    gmain.h
    gmarkup.h
    gmem.h
    gmessages.h
    gnode.h
    gpattern.h
    gprimes.h
    gqsort.h
    gquark.h
    gqueue.h
    grand.h
    grel.h
    gscanner.h
    gshell.h
    gslist.h
    gspawn.h
    gstrfuncs.h
    gstring.h
    gthread.h
    gthreadpool.h
    gtimer.h
    gtree.h
    gtypes.h
    gunibreak.h
    gunichartables.h
    gunicode.h
    gunicomp.h
    gunidecomp.h
    gutils.h
    gwin32.h
  glib.h
  glibconfig-sysdefs.h
  glibconfig.h