AssemblyInfo.cs from Make Controller at Krugle

Show AssemblyInfo.cs syntax highlighted


ï»¿using System.Reflection;
using System.Runtime.CompilerServices;
using System.Runtime.InteropServices;

// General Information about an assembly is controlled through the following 
// set of attributes. Change these attribute values to modify the information
// associated with an assembly.
[assembly: AssemblyTitle("MakeControllerOsc")]
[assembly: AssemblyDescription("")]
[assembly: AssemblyConfiguration("")]
[assembly: AssemblyCompany("MakingThings")]
[assembly: AssemblyProduct("MakeControllerOsc")]
[assembly: AssemblyCopyright("Copyright Â©  2006")]
[assembly: AssemblyTrademark("")]
[assembly: AssemblyCulture("")]

// Setting ComVisible to false makes the types in this assembly not visible 
// to COM components.  If you need to access a type in this assembly from 
// COM, set the ComVisible attribute to true on that type.
[assembly: ComVisible(false)]

// The following GUID is for the ID of the typelib if this project is exposed to COM
[assembly: Guid("cf68bb7a-ff2d-4bad-b4b9-7b94c06e3a81")]

// Version information for an assembly consists of the following four values:
//
//      Major Version
//      Minor Version 
//      Build Number
//      Revision
//
// You can specify all the values or you can default the Revision and Build Numbers 
// by using the '*' as shown below:
[assembly: AssemblyVersion("1.0.0.0")]
[assembly: AssemblyFileVersion("1.0.0.0")]

See more files for this project here

Make Controller

The Make Controller is an open microcontroller platform for Makers of all kinds, by MakingThings. This project maintains the official firmware for the board and source for the software tools used with the board.

Project homepage: http://sourceforge.net/projects/makingthings
Programming language(s): C,C#,C++
License: other

  AssemblyInfo.cs