Show README syntax highlighted
######################## README #############################################
wrflash - tool to erase/write on PCMCIA linear flash memory cards
Copyright (C) 1999-2001 telos EDV Systementwicklung GmbH (telos)
wrflash is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
wrflash is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
Author(s):
Kolja Waschk, telos (KW)
Contact:
mailto:alios@telos.de, http://www.telos.de/linux/
THANKS TO THE DEVELOPERS OF LINUX MTD (Memory Technology Devices Subsystem),
which includes the utils on which this code bases. Go to
http://www.linux-mtd.infradead.org/
to find out more about them.
##### USAGE #################################################################
We wrote "wrflash" to be able to easily re-program PCMCIA linear flash
cards. The Linux PCMCIA support basically includes all the low level
support for these devices, but to actually re-program the cards some
ioctl()s have to be used and therefore a simple 'dd' will not work.
Command line syntax:
wrflash {options} {device}
{device} will probably be something like /dev/mem0c0c to access the
"common" memory on a card inserted in a PCMCIA socket.
The following options are recognized:
-e Perform all necessary block erasures before writing any data.
By default, wrflash won't erase before writing.
-f {inputfile} Use {inputfile} as the data source
-s {address} Start writing at {address}, specified in decimal, octal
(with leading 0) or hexadecimal (with leading 0x).
If you use "-e", the first byte actually modified is
at {address} modulo flash block size (e.g. 128 kByte).
-q Don't print informational messages
-i Don't prompt.
See more files for this project here
OpenAP is the complete distribution of open-source software that is required to produce a fully 802.11b compliant wireless access point. OpenAP is also a platform on which developers and hobbyists may realize their ideas. Since the build environment and s
Project homepage:
http://savannah.nongnu.org/projects/openap
Programming language(s): Assembly,C
License: gpl2
Makefile
README
wrflash.c