Show Makefile syntax highlighted
SHELL=/bin/sh
# To assist in cross-compiling
CC=gcc
AR=ar
RANLIB=ranlib
LDFLAGS=
BIGFILES=-D_FILE_OFFSET_BITS=64
CFLAGS=-Wall -Winline -O -g $(BIGFILES)
# Where you want it installed when you do 'make install'
PREFIX=/usr
OBJS= blocksort.o \
huffman.o \
crctable.o \
randtable.o \
compress.o \
decompress.o \
bzlib.o
all: libbz2.a bzip2 bzip2recover test
bzip2: libbz2.a bzip2.o
$(CC) $(CFLAGS) $(LDFLAGS) -o bzip2 bzip2.o -L. -lbz2
bzip2recover: bzip2recover.o
$(CC) $(CFLAGS) $(LDFLAGS) -o bzip2recover bzip2recover.o
libbz2.a: $(OBJS)
rm -f libbz2.a
$(AR) cq libbz2.a $(OBJS)
@if ( test -f $(RANLIB) -o -f /usr/bin/ranlib -o \
-f /bin/ranlib -o -f /usr/ccs/bin/ranlib ) ; then \
echo $(RANLIB) libbz2.a ; \
$(RANLIB) libbz2.a ; \
fi
check: test
test: bzip2
@cat words1
./bzip2 -1 < sample1.ref > sample1.rb2
./bzip2 -2 < sample2.ref > sample2.rb2
./bzip2 -3 < sample3.ref > sample3.rb2
./bzip2 -d < sample1.bz2 > sample1.tst
./bzip2 -d < sample2.bz2 > sample2.tst
./bzip2 -ds < sample3.bz2 > sample3.tst
cmp sample1.bz2 sample1.rb2
cmp sample2.bz2 sample2.rb2
cmp sample3.bz2 sample3.rb2
cmp sample1.tst sample1.ref
cmp sample2.tst sample2.ref
cmp sample3.tst sample3.ref
@cat words3
install: bzip2 bzip2recover
if ( test ! -d $(PREFIX)/bin ) ; then mkdir -p $(PREFIX)/bin ; fi
if ( test ! -d $(PREFIX)/lib ) ; then mkdir -p $(PREFIX)/lib ; fi
if ( test ! -d $(PREFIX)/man ) ; then mkdir -p $(PREFIX)/man ; fi
if ( test ! -d $(PREFIX)/man/man1 ) ; then mkdir -p $(PREFIX)/man/man1 ; fi
if ( test ! -d $(PREFIX)/include ) ; then mkdir -p $(PREFIX)/include ; fi
cp -f bzip2 $(PREFIX)/bin/bzip2
cp -f bzip2 $(PREFIX)/bin/bunzip2
cp -f bzip2 $(PREFIX)/bin/bzcat
cp -f bzip2recover $(PREFIX)/bin/bzip2recover
chmod a+x $(PREFIX)/bin/bzip2
chmod a+x $(PREFIX)/bin/bunzip2
chmod a+x $(PREFIX)/bin/bzcat
chmod a+x $(PREFIX)/bin/bzip2recover
cp -f bzip2.1 $(PREFIX)/man/man1
chmod a+r $(PREFIX)/man/man1/bzip2.1
cp -f bzlib.h $(PREFIX)/include
chmod a+r $(PREFIX)/include/bzlib.h
cp -f libbz2.a $(PREFIX)/lib
chmod a+r $(PREFIX)/lib/libbz2.a
cp -f bzgrep $(PREFIX)/bin/bzgrep
ln $(PREFIX)/bin/bzgrep $(PREFIX)/bin/bzegrep
ln $(PREFIX)/bin/bzgrep $(PREFIX)/bin/bzfgrep
chmod a+x $(PREFIX)/bin/bzgrep
cp -f bzmore $(PREFIX)/bin/bzmore
ln $(PREFIX)/bin/bzmore $(PREFIX)/bin/bzless
chmod a+x $(PREFIX)/bin/bzmore
cp -f bzdiff $(PREFIX)/bin/bzdiff
ln $(PREFIX)/bin/bzdiff $(PREFIX)/bin/bzcmp
chmod a+x $(PREFIX)/bin/bzdiff
cp -f bzgrep.1 bzmore.1 bzdiff.1 $(PREFIX)/man/man1
chmod a+r $(PREFIX)/man/man1/bzgrep.1
chmod a+r $(PREFIX)/man/man1/bzmore.1
chmod a+r $(PREFIX)/man/man1/bzdiff.1
echo ".so man1/bzgrep.1" > $(PREFIX)/man/man1/bzegrep.1
echo ".so man1/bzgrep.1" > $(PREFIX)/man/man1/bzfgrep.1
echo ".so man1/bzmore.1" > $(PREFIX)/man/man1/bzless.1
echo ".so man1/bzdiff.1" > $(PREFIX)/man/man1/bzcmp.1
clean:
rm -f *.o libbz2.a bzip2 bzip2recover \
sample1.rb2 sample2.rb2 sample3.rb2 \
sample1.tst sample2.tst sample3.tst
blocksort.o: blocksort.c
@cat words0
$(CC) $(CFLAGS) -c blocksort.c
huffman.o: huffman.c
$(CC) $(CFLAGS) -c huffman.c
crctable.o: crctable.c
$(CC) $(CFLAGS) -c crctable.c
randtable.o: randtable.c
$(CC) $(CFLAGS) -c randtable.c
compress.o: compress.c
$(CC) $(CFLAGS) -c compress.c
decompress.o: decompress.c
$(CC) $(CFLAGS) -c decompress.c
bzlib.o: bzlib.c
$(CC) $(CFLAGS) -c bzlib.c
bzip2.o: bzip2.c
$(CC) $(CFLAGS) -c bzip2.c
bzip2recover.o: bzip2recover.c
$(CC) $(CFLAGS) -c bzip2recover.c
distclean: clean
rm -f manual.ps manual.html manual.pdf
DISTNAME=bzip2-1.0.3
dist: check manual
rm -f $(DISTNAME)
ln -sf . $(DISTNAME)
tar cvf $(DISTNAME).tar \
$(DISTNAME)/blocksort.c \
$(DISTNAME)/huffman.c \
$(DISTNAME)/crctable.c \
$(DISTNAME)/randtable.c \
$(DISTNAME)/compress.c \
$(DISTNAME)/decompress.c \
$(DISTNAME)/bzlib.c \
$(DISTNAME)/bzip2.c \
$(DISTNAME)/bzip2recover.c \
$(DISTNAME)/bzlib.h \
$(DISTNAME)/bzlib_private.h \
$(DISTNAME)/Makefile \
$(DISTNAME)/LICENSE \
$(DISTNAME)/bzip2.1 \
$(DISTNAME)/bzip2.1.preformatted \
$(DISTNAME)/bzip2.txt \
$(DISTNAME)/words0 \
$(DISTNAME)/words1 \
$(DISTNAME)/words2 \
$(DISTNAME)/words3 \
$(DISTNAME)/sample1.ref \
$(DISTNAME)/sample2.ref \
$(DISTNAME)/sample3.ref \
$(DISTNAME)/sample1.bz2 \
$(DISTNAME)/sample2.bz2 \
$(DISTNAME)/sample3.bz2 \
$(DISTNAME)/dlltest.c \
$(DISTNAME)/manual.html \
$(DISTNAME)/manual.pdf \
$(DISTNAME)/manual.ps \
$(DISTNAME)/README \
$(DISTNAME)/README.COMPILATION.PROBLEMS \
$(DISTNAME)/README.XML.STUFF \
$(DISTNAME)/CHANGES \
$(DISTNAME)/libbz2.def \
$(DISTNAME)/libbz2.dsp \
$(DISTNAME)/dlltest.dsp \
$(DISTNAME)/makefile.msc \
$(DISTNAME)/Y2K_INFO \
$(DISTNAME)/unzcrash.c \
$(DISTNAME)/spewG.c \
$(DISTNAME)/mk251.c \
$(DISTNAME)/bzdiff \
$(DISTNAME)/bzdiff.1 \
$(DISTNAME)/bzmore \
$(DISTNAME)/bzmore.1 \
$(DISTNAME)/bzgrep \
$(DISTNAME)/bzgrep.1 \
$(DISTNAME)/Makefile-libbz2_so \
$(DISTNAME)/bz-common.xsl \
$(DISTNAME)/bz-fo.xsl \
$(DISTNAME)/bz-html.xsl \
$(DISTNAME)/bzip.css \
$(DISTNAME)/entities.xml \
$(DISTNAME)/manual.xml \
$(DISTNAME)/format.pl \
$(DISTNAME)/xmlproc.sh
gzip -v $(DISTNAME).tar
# For rebuilding the manual from sources on my SuSE 9.1 box
MANUAL_SRCS= bz-common.xsl bz-fo.xsl bz-html.xsl bzip.css \
entities.xml manual.xml
manual: manual.html manual.ps manual.pdf
manual.ps: $(MANUAL_SRCS)
./xmlproc.sh -ps manual.xml
manual.pdf: $(MANUAL_SRCS)
./xmlproc.sh -pdf manual.xml
manual.html: $(MANUAL_SRCS)
./xmlproc.sh -html manual.xml
See more files for this project here