Show install.sh syntax highlighted
#!/bin/bash
# $Id: install.sh 5839 2006-04-13 15:19:51Z xmldoc $
# $Source$ #
# install.sh - Set up catalogs & locating rules for a XML/XSLT distribution
# This is as a interactive installer for updating a single-user
# environment to make use of XML catalog and schema "locating
# rules" data provided in an XML/XSLT distribution.
#
# Although this installer was created for the DocBook project, it
# is a general-purpose tool that can be used with any XML/XSLT
# distribution that provides XML/SGML catalogs and locating rules.
#
# It is mainly intended to make things easier for users who want
# to install a particular XML/XSLT distribution that has not (yet)
# been packaged for their OS distro (Debian, Fedora, whatever).
#
# It works by updating the user's shell startup files (e.g.,
# .bashrc and .cshrc) and .emacs file and by finding or creating a
# writable CatalogManager.properties file to update.
#
# It makes backup copies of any files it touches, and also
# generates a uninstall.sh script for reverting its changes.
#
# In the same directory where it is located, it expects to find
# four files (below). And if it is unable to locate a
# CatalogManager.properties file in the user environment, it
# expects to find an "example" one in the same directory, which it
# copies over to the user's ~/.resolver directory.
mydir=$(readlink -f $(dirname $0))
thisLocatingRules=$mydir/locatingrules.xml
thisXmlCatalog=$mydir/catalog.xml
thisSgmlCatalog=$mydir/catalog
# .urilist file contains a list of pairs of local pathnames and
# URIs to test for catalog resolution
thisUriList=$mydir/.urilist
exampleCatalogManager=$mydir/.CatalogManager.properties.example
thisCatalogManager=$HOME/.resolver/CatalogManager.properties
emit_message() {
echo $1 1>&2
}
if [ ! "${*#--batch}" = "$*" ]; then
batchmode="Yes";
else
batchmode="No";
emit_message
if [ ! "$1" = "--test" ]; then
emit_message "NOTE: For non-interactive installs/uninstalls, use --batch"
if [ ! "$1" = "--uninstall" ]; then
emit_message
fi
fi
fi
osName=$(uname -o)
classPathSeparator=":"
if [ "$osName" = "Cygwin" ]; then
thisJavaXmlCatalog=$(cygpath -m $thisXmlCatalog)
classPathSeparator=";"
else
thisJavaXmlCatalog=$thisXmlCatalog
fi
main() {
removeOldFiles
checkRoot
updateCatalogManager
checkForResolver
writeDotFiles
updateUserStartupFiles
updateUserDotEmacs
writeUninstallFile
writeTestFile
printExitMessage
}
removeOldFiles() {
rm -f $mydir/.profile.incl
rm -f $mydir/.cshrc.incl
rm -f $mydir/.emacs.el
}
checkRoot() {
if [ $(id -u) == "0" ]; then
cat 1>&2 <<EOF
WARNING: This install script is meant to be run as a non-root
user, but you are running it as root.
EOF
read -s -n1 -p "Are you sure you want to continue? [No] "
emit_message "$REPLY"
case $REPLY in
[yY])
emit_message
;;
*) emit_message "OK, exiting without making changes."
exit
;;
esac
fi
return 0
}
updateCatalogManager() {
# - finds or creates a writable CatalogManager.properties file
#
# - adds the catalog.xml file for this distribution to the
# CatalogManager.properties file found
if [ -z "$CLASSPATH" ]; then
cat 1>&2 <<EOF
NOTE: There is no CLASSPATH variable set in your environment.
No attempt was made to find a CatalogManager.properties
file. Using $thisCatalogManager instead
EOF
else
# split CLASSPATH in a list of pathnames by replacing all separator
# characters with spaces
if [ "$osName" = "Cygwin" ]; then
pathnames=$(echo $CLASSPATH | tr ";" " ")
else
pathnames=$(echo $CLASSPATH | tr ":" " ")
fi
for path in $pathnames; do
if [ "$osName" = "Cygwin" ]; then
path=$(cygpath -u $path)
fi
# strip out trailing slash from pathname
path=$(echo $path | sed 's/\/$//')
# find CatalogManager.properties file
if [ -f $path/CatalogManager.properties ];
then
existingCatalogManager=$path/CatalogManager.properties
break
fi
done
fi
# end of CLASSPATH check
if [ -w "$existingCatalogManager" ]; then
# existing CatalogManager.properties was found and it is
# writable, so use it
myCatalogManager=$existingCatalogManager
else
if [ -f "$existingCatalogManager" ]; then
# a non-writable CatalogManager.properties exists, so emit a
# note saying that it won't be used
cat 1>&2 <<EOF
NOTE: $existingCatalogManager file found,
but you don't have permission to write to it.
Will instead use $thisCatalogManager
EOF
else
# CLASSPATH is set, but no CatalogManager.properties found
if [ -n "$CLASSPATH" ]; then
cat 1>&2 <<EOF
NOTE: No CatalogManager.properties found from CLASSPATH.
Will instead use $thisCatalogManager
EOF
fi
fi
if [ "$batchmode" = "Yes" ]; then
emit_message
fi
# end of check for existing writable CatalogManager.properties
if [ -f $thisCatalogManager ]; then
myCatalogManager=$thisCatalogManager
else
REPLY=""
if [ ! "$batchmode" = "Yes" ]; then
emit_message
read -s -n1 -p "Create $thisCatalogManager file? [Yes] "
emit_message "$REPLY"
emit_message
fi
case $REPLY in
[nNqQ])
emitNoChangeMsg
;;
*)
if [ ! -d "${thisCatalogManager%/*}" ]; then
mkdir -p ${thisCatalogManager%/*}
fi
cp $mydir/.CatalogManager.properties.example $thisCatalogManager || exit 1
emit_message "NOTE: $thisCatalogManager file created"
myCatalogManager=$thisCatalogManager
;;
esac
# end of creating "private" CatalogManager.properties
fi
# end of check for "private" CatalogManager.properties
fi
# end of check finding/creating writable CatalogManager.properties
if [ -n "$myCatalogManager" ]; then
etcXmlCatalog=
catalogsLine=$(grep "^catalogs=" $myCatalogManager)
if [ -f /etc/xml/catalog ] && [ "$osName" != "Cygwin" ] \
&& [ "${catalogsLine#*/etc/xml/catalog*}" = "$catalogsLine" ]; then
cat 1>&2 <<EOF
WARNING: /etc/xml/catalog exists but was not found in the
$myCatalogManager file. If the
/etc/xml/catalog file has content, you probably should reference
it in your $myCatalogManager
file. This installer can automatically add it for you,
but BE WARNED that once it has been added, the uninstaller
for this distribution CANNOT REMOVE IT automatically
during uninstall. If you no longer want it included, you
will need to remove it manually.
EOF
REPLY=""
if [ ! "$batchmode" = "Yes" ]; then
read -s -n1 -p "Add /etc/xml/catalog to $myCatalogManager? [Yes] "
emit_message "$REPLY"
fi
case $REPLY in
[nNqQ])
emit_message
;;
*)
etcXmlCatalog=/etc/xml/catalog
;;
esac
fi
catalogBackup="$myCatalogManager.$$.bak"
if [ ! -w "${myCatalogManager%/*}" ]; then
emit_message
emit_message "WARNING: ${myCatalogManager%/*} directory is not writable."
emit_message
emitNoChangeMsg
else
REPLY=""
if [ ! "$batchmode" = "Yes" ]; then
emit_message
emit_message "Add $thisJavaXmlCatalog"
read -s -n1 -p "to $myCatalogManager file? [Yes] "
emit_message "$REPLY"
emit_message
fi
case $REPLY in
[nNqQ])
emitNoChangeMsg
;;
*)
if [ "$catalogsLine" ] ; then
if [ "${catalogsLine#*$thisJavaXmlCatalog*}" != "$catalogsLine" ]; then
emit_message "NOTE: $thisJavaXmlCatalog already"
emit_message " in $myCatalogManager"
else
mv $myCatalogManager $catalogBackup || exit 1
sed "s#^catalogs=\(.*\)\$#catalogs=$thisJavaXmlCatalog;\1;$etcXmlCatalog#" $catalogBackup \
| sed 's/;\+/;/' | sed 's/;$//' > $myCatalogManager || exit 1
emit_message "NOTE: $myCatalogManager file successfully updated."
emit_message " Backup written to $catalogBackup"
fi
else
mv $myCatalogManager $catalogBackup || exit 1
cp $catalogBackup $myCatalogManager
echo "catalogs=$thisJavaXmlCatalog;$etcXmlCatalog" \
| sed 's/;\+/;/' | sed 's/;$//' >> $myCatalogManager || exit 1
emit_message "NOTE: \"catalogs=\" line added to $myCatalogManager."
emit_message " Backup written to $catalogBackup"
fi
;;
esac
# end of backing up and updating CatalogManager.properties
fi
fi
# end of CatalogManager.properties updates
if [ "$osName" = "Cygwin" ]; then
myCatalogManager=$(cygpath -m $myCatalogManager)
fi
return 0
}
writeDotFiles() {
while read; do
echo "$REPLY" >> $mydir/.profile.incl
done <<EOF
if [ -z "\$XML_CATALOG_FILES" ]; then
XML_CATALOG_FILES="$thisXmlCatalog"
else
# $thisXmlCatalog is not in XML_CATALOG_FILES, so add it
if [ "\${XML_CATALOG_FILES#*$thisXmlCatalog*}" = "\$XML_CATALOG_FILES" ]; then
XML_CATALOG_FILES="$thisXmlCatalog \$XML_CATALOG_FILES"
fi
fi
# /etc/xml/catalog exists but is not in XML_CATALOG_FILES, so add it
if [ -f /etc/xml/catalog ] && \
[ "\${XML_CATALOG_FILES#*/etc/xml/catalog*}" = "\$XML_CATALOG_FILES" ]; then
XML_CATALOG_FILES="\$XML_CATALOG_FILES /etc/xml/catalog"
fi
export XML_CATALOG_FILES
if [ -z "\$SGML_CATALOG_FILES" ]; then
SGML_CATALOG_FILES="$thisSgmlCatalog"
else
# $thisSgmlCatalog is not in SGML_CATALOG_FILES, so add it
if [ "\${SGML_CATALOG_FILES#*$thisSgmlCatalog}" = "\$SGML_CATALOG_FILES" ]; then
SGML_CATALOG_FILES="$thisSgmlCatalog:\$SGML_CATALOG_FILES"
fi
fi
# /etc/sgml/catalog exists but is not in SGML_CATALOG_FILES, so add it
if [ -f /etc/sgml/catalog ] && \
[ "\${SGML_CATALOG_FILES#*/etc/sgml/catalog*}" = "\$SGML_CATALOG_FILES" ]; then
SGML_CATALOG_FILES="\$SGML_CATALOG_FILES:/etc/sgml/catalog"
fi
export SGML_CATALOG_FILES
EOF
while read; do
echo "$REPLY" >> $mydir/.cshrc.incl
done <<EOF
if ( ! $\?XML_CATALOG_FILES ) then
setenv XML_CATALOG_FILES "$thisXmlCatalog"
# $thisXmlCatalog is not in XML_CATALOG_FILES, so add it
else if ( "\\\`echo \$XML_CATALOG_FILES | grep -v $thisXmlCatalog\\\`" != "" ) then
setenv XML_CATALOG_FILES "$thisXmlCatalog \$XML_CATALOG_FILES"
endif
endif
# /etc/xml/catalog exists but is not in XML_CATALOG_FILES, so add it
if ( -f /etc/xml/catalog && "\\\`echo \$XML_CATALOG_FILES | grep -v /etc/xml/catalog\\\`" != "" ) then
setenv XML_CATALOG_FILES "\$XML_CATALOG_FILES /etc/xml/catalog"
endif
endif
if ( ! $\?SGML_CATALOG_FILES ) then
setenv SGML_CATALOG_FILES "$thisSgmlCatalog"
else if ( "\\\`echo \$SGML_CATALOG_FILES | grep -v $thisSgmlCatalog\\\`" != "" ) then
setenv SGML_CATALOG_FILES "$thisSgmlCatalog \$SGML_CATALOG_FILES"
endif
endif
# /etc/SGML/catalog exists but is not in SGML_CATALOG_FILES, so add it
if ( -f /etc/sgml/catalog && "\\\`echo \$SGML_CATALOG_FILES | grep -v /etc/sgml/catalog\\\`" != "" ) then
setenv SGML_CATALOG_FILES "\$SGML_CATALOG_FILES /etc/sgml/catalog"
endif
EOF
if [ -n "$myCatalogManager" ]; then
myCatalogManagerDir=${myCatalogManager%/*}
while read; do
echo "$REPLY" >> $mydir/.profile.incl
done <<EOF
if [ -z "\$CLASSPATH" ]; then
CLASSPATH="$myCatalogManagerDir"
else
# $myCatalogManagerDir is not in CLASSPATH, so add it
if [ "\${CLASSPATH#*$myCatalogManagerDir*}" = "\$CLASSPATH" ]; then
CLASSPATH="$myCatalogManagerDir$classPathSeparator\$CLASSPATH"
fi
fi
export CLASSPATH
EOF
while read; do
echo "$REPLY" >> $mydir/.cshrc.incl
done <<EOF
if ( ! $\?CLASSPATH ) then
setenv CLASSPATH "$myCatalogManagerDir"
# $myCatalogManagerDir is not in CLASSPATH, so add it
else if ( "\\\`echo \$CLASSPATH | grep -v $myCatalogManagerDir\\\`" != "" ) then
setenv CLASSPATH "$myCatalogManagerDir$classPathSeparator\$CLASSPATH"
endif
endif
EOF
fi
while read; do
echo "$REPLY" >> $mydir/.emacs.el
done <<EOF
(add-hook
'nxml-mode-hook
(lambda ()
(setq rng-schema-locating-files-default
(append '("$thisLocatingRules")
rng-schema-locating-files-default ))))
EOF
return 0
}
updateUserStartupFiles() {
if [ ! "$batchmode" = "Yes" ]; then
cat 1>&2 <<EOF
NOTE: To source your environment correctly for using the catalog
files in this distribution, you need to update one or more
of your shell startup files. This installer can
automatically make the necessary changes. Or, if you prefer,
you can make the changes manually.
EOF
else
emit_message
fi
# if user is running csh or tcsh, target .cshrc and .tcshrc
# files for update; otherwise, target .bash_* and .profiles
parent=$(ps $PPID | grep "/")
if [ "${parent#*csh}" != "$parent" ] || [ "${parent#*tcsh}" != "$parent" ]; then
myStartupFiles=".cshrc .tcshrc"
appendLine="source $mydir/.cshrc.incl"
else
myStartupFiles=".bash_profile .bash_login .profile .bashrc"
appendLine=". $mydir/.profile.incl"
fi
for file in $myStartupFiles; do
if [ -f "$HOME/$file" ]; then
dotFileBackup=$HOME/$file.$$.bak
REPLY=""
if [ ! "$batchmode" = "Yes" ]; then
read -s -n1 -p "Update $HOME/$file? [Yes] "
emit_message "$REPLY"
fi
case $REPLY in
[nNqQ])
cat 1>&2 <<EOF
NOTE: No change made to $HOME/$file. You either need
to add the following line to it, or manually source
the shell environment for this distribution each
time you want use it.
$appendLine
EOF
;;
*)
lineExists="$(grep "$appendLine" $HOME/$file )"
if [ ! "$lineExists" ]; then
mv $HOME/$file $dotFileBackup || exit 1
cp $dotFileBackup $HOME/$file || exit 1
echo "$appendLine" >> $HOME/$file || exit 1
cat 1>&2 <<EOF
NOTE: $HOME/$file file successfully updated.
Backup written to $dotFileBackup
EOF
else
cat 1>&2 <<EOF
NOTE: $HOME/$file already contains information for this distribution.
$HOME/$file not updated.
EOF
fi
;;
esac
fi
done
if [ -z "$dotFileBackup" ]; then
if [ ! "$batchmode" = "Yes" ]; then
emit_message
fi
cat 1>&2 <<EOF
NOTE: No shell startup files updated. You can source the
environment for this distribution manually, each time you
want to use it, by typing the following.
$appendLine
EOF
fi
}
updateUserDotEmacs() {
if [ -f $thisLocatingRules ]; then
cat 1>&2 <<EOF
NOTE: This distribution includes a "schema locating rules" file
for Emacs/nXML. To use it, you should update either your
.emacs or .emacs.el file. This installer can automatically
make the necessary changes. Or, if you prefer, you can make
the changes manually.
EOF
emacsAppendLine="(load-file \"$mydir/.emacs.el\")"
myEmacsFile=
for file in .emacs .emacs.el; do
if [ -f "$HOME/$file" ]; then
myEmacsFile=$HOME/$file
break
fi
done
if [ ! -f "$myEmacsFile" ]; then
REPLY=""
if [ ! "$batchmode" = "Yes" ]; then
read -s -n1 -p "No .emacs or .emacs.el file. Create one? [No] "
emit_message "$REPLY"
emit_message
fi
case $REPLY in
[yY])
myEmacsFile=$HOME/.emacs
touch $myEmacsFile
;;
*)
cat 1>&2 <<EOF
NOTE: No Emacs changes made. To use this distribution with,
Emacs/nXML, you can create a .emacs file and manually add
the following line to it, or you can run it as a command
within Emacs.
$emacsAppendLine
EOF
;;
esac
fi
if [ -n "$myEmacsFile" ]; then
REPLY=""
if [ ! "$batchmode" = "Yes" ]; then
read -s -n1 -p "Update $myEmacsFile? [Yes] "
emit_message "$REPLY"
emit_message
fi
case $REPLY in
[nNqQ])
cat 1>&2 <<EOF
NOTE: No change made to $myEmacsFile. To use this distribution
with Emacs/nXML, you can manually add the following line
to your $myEmacsFile, or you can run it as a command
within Emacs.
$emacsAppendLine
EOF
;;
*)
lineExists="$(grep "$emacsAppendLine" $myEmacsFile)"
if [ ! "$lineExists" ]; then
dotEmacsBackup=$myEmacsFile.$$.bak
mv $myEmacsFile $dotEmacsBackup || exit 1
cp $dotEmacsBackup $myEmacsFile || exit 1
echo "$emacsAppendLine" >> $myEmacsFile || exit 1
cat 1>&2 <<EOF
NOTE: $myEmacsFile file successfully updated.
Backup written to $dotEmacsBackup
EOF
else
cat 1>&2 <<EOF
NOTE: $myEmacsFile already contains information for this distribution.
$myEmacsFile not updated.
EOF
fi
;;
esac
fi
fi
}
uninstall() {
if [ ! "$batchmode" = "Yes" ]; then
cat 1>&2 <<EOF
NOTE: To "uninstall" this distribution, the changes made to your
CatalogManagers.properties, startup files, and/or .emacs
file need to be reverted. This uninstaller can automatically
revert them. Or, if you prefer, you can revert them manually.
EOF
fi
if [ "$osName" = "Cygwin" ]; then
thisXmlCatalog=$thisJavaXmlCatalog
fi
# make "escaped" version of PWD to use with sed and grep
escapedPwd=$(echo $mydir | sed "s#/#\\\\\/#g")
# check to see if a non-empty value for catalogManager was fed
# to uninstaller.
if [ -n ${1#--catalogManager=} ]; then
myCatalogManager=${1#--catalogManager=}
catalogBackup="$myCatalogManager.$$.bak"
catalogsLine=$(grep "^catalogs=" $myCatalogManager)
if [ "$catalogsLine" ] ; then
if [ "${catalogsLine#*$thisXmlCatalog*}" != "$catalogsLine" ]; then
REPLY=""
if [ ! "$batchmode" = "Yes" ]; then
read -s -n1 -p "Revert $myCatalogManager? [Yes] "
emit_message "$REPLY"
fi
case $REPLY in
[nNqQ]*)
cat 1>&2 <<EOF
NOTE: No change made to $myCatalogManager. You need to manually
remove the following path from the "catalog=" line.
$thisXmlCatalog
EOF
;;
*)
mv $myCatalogManager $catalogBackup || exit 1
sed "s#^catalogs=\(.*\)$thisXmlCatalog\(.*\)\$#catalogs=\1\2#" $catalogBackup \
| sed 's/;\+/;/' | sed 's/;$//' | sed 's/=;/=/' > $myCatalogManager || exit 1
cat 1>&2 <<EOF
NOTE: $myCatalogManager file successfully reverted.
Backup written to $catalogBackup
EOF
;;
esac
else
emit_message "NOTE: No data for this distribution found in $myCatalogManager"
emit_message
fi
else
cat 1>&2 <<EOF
NOTE: No data for this distribution found in $myCatalogManager
So, nothing to revert in $myCatalogManager
EOF
fi
fi
if [ -n "$myEmacsFile" ]; then
# check to see if a non-empty value for --dotEmacs file was fed
# to uninstaller.
if [ -n ${2#--dotEmacs=} ]; then
myEmacsFile=${2#--dotEmacs=}
revertLine="(load-file \"$escapedPwd\/\.emacs\.el\")"
loadLine="$(grep "$revertLine" "$myEmacsFile")"
if [ -n "$loadLine" ]; then
emit_message
REPLY=""
if [ ! "$batchmode" = "Yes" ]; then
read -s -n1 -p "Revert $myEmacsFile? [Yes] "
emit_message "$REPLY"
fi
case $REPLY in
[nNqQ]*)
cat 1>&2 <<EOF
NOTE: No change made to $myEmacsFile. You need to manually
remove the following line.
(load-file \"$mydir/.emacs.el\")
EOF
;;
*)
dotEmacsBackup=$myEmacsFile.$$.bak
mv $myEmacsFile $dotEmacsBackup || exit 1
cp $dotEmacsBackup $myEmacsFile || exit 1
sed -i "/$revertLine/d" $myEmacsFile || exit 1
cat 1>&2 <<EOF
NOTE: $myEmacsFile file successfully reverted.
Backup written to $dotEmacsBackup
EOF
;;
esac
else
emit_message "NOTE: No data for this distribution found in $myEmacsFile"
fi
fi
fi
# check all startup files
myStartupFiles=".bash_profile .bash_login .profile .bashrc .cshrc .tcshrc"
for file in $myStartupFiles; do
if [ -e "$HOME/$file" ]; then
case $file in
.tcshrc|.cshrc)
revertLine="source $mydir/.cshrc.incl"
revertLineEsc="source $escapedPwd\/\.cshrc\.incl"
;;
*)
revertLine=". $mydir/.profile.incl"
revertLineEsc="\. $escapedPwd\/\.profile\.incl"
;;
esac
lineExists="$(grep "$revertLineEsc" $HOME/$file )"
if [ "$lineExists" ]; then
REPLY=""
if [ ! "$batchmode" = "Yes" ]; then
read -s -n1 -p "Update $HOME/$file? [Yes] "
emit_message "$REPLY"
fi
case $REPLY in
[nNqQ]*)
cat 1>&2 <<EOF
NOTE: No change made to $HOME/$file. You need to manually remove
the following line from it.
$revertLine
EOF
;;
*)
dotFileBackup=$HOME/$file.$$.bak
mv $HOME/$file $dotFileBackup || exit 1
cp $dotFileBackup $HOME/$file || exit 1
sed -i "/$revertLineEsc/d" $HOME/$file || exit 1
cat 1>&2 <<EOF
NOTE: $HOME/$file file successfully updated.
Backup written to $dotFileBackup
EOF
;;
esac
else
emit_message "NOTE: No data for this distribution found in $HOME/$file"
emit_message
fi
fi
done
removeOldFiles
emit_message "Done. Deleted uninstall.sh file."
rm -f $mydir/test.sh || exit 1
rm -f $mydir/uninstall.sh || exit 1
}
writeUninstallFile() {
uninstallFile=$mydir/uninstall.sh
echo "#!/bin/bash" > $uninstallFile || exit 1
echo "mydir=\$(readlink -f \$(dirname \$0))" >> $uninstallFile || exit 1
echo "\$mydir/install.sh \\" >> $uninstallFile || exit 1
echo " --uninstall \\" >> $uninstallFile || exit 1
echo " --catalogManager=$myCatalogManager \\" >> $uninstallFile || exit 1
echo " --dotEmacs=$myEmacsFile \\" >> $uninstallFile || exit 1
echo " \$@" >> $uninstallFile || exit 1
chmod 755 $uninstallFile || exit 1
}
writeTestFile() {
testFile=$mydir/test.sh
echo "#!/bin/bash" > $testFile || exit 1
echo "mydir=\$(readlink -f \$(dirname \$0))" >> $testFile || exit 1
echo "\$mydir/install.sh --test" >> $testFile || exit 1
chmod 755 $testFile || exit 1
}
printExitMessage() {
cat 1>&2 <<EOF
Type the following to source your shell environment for the distribution
$appendLine
EOF
}
checkForResolver() {
resolverResponse="$(java org.apache.xml.resolver.apps.resolver uri -u foo 2>/dev/null)"
if [ -z "$resolverResponse" ]; then
cat 1>&2 <<EOF
NOTE: Your environment does not seem to contain the Apache XML Commons
Resolver; without that, you can't use XML catalogs with Java.
For more information, see the "How to use a catalog file" section
in Bob Stayton's "DocBook XSL: The Complete Guide"
http://sagehill.net/docbookxsl/UseCatalog.html
EOF
fi
}
emitNoChangeMsg() {
cat 1>&2 <<EOF
NOTE: No changes was made to CatalogManagers.properties. To
provide your Java tools with XML catalog information for
this distribution, you will need to make the appropriate
changes manually.
EOF
}
testCatalogs() {
readlinkResponse="$(readlink -f . 2>/dev/null)"
if [ -z "$readlinkResponse" ]; then
cat 1>&2 <<EOF
FATAL: Cannot locate the "readlink" command. Stopping.
EOF
exit
fi
if [ ! -f "$thisXmlCatalog" ]; then
cat 1>&2 <<EOF
FATAL: $thisXmlCatalog file needed but not found. Stopping.
EOF
exit
fi
if [ -z "$XML_CATALOG_FILES" ]; then
emit_message
emit_message "WARNING: XML_CATALOG_FILES not set. Not testing with xmlcatalog."
else
xmlCatalogResponse="$(xmlcatalog 2>/dev/null)"
if [ -z "$xmlCatalogResponse" ]; then
cat 1>&2 <<EOF
WARNING: Cannot locate the "xmlcatalog" command. Make sure that
you have libxml2 and its associated utilities installed.
http://xmlsoft.org/
EOF
else
emit_message "Testing with xmlcatalog..."
while read pair; do
path=$(readlink -f "$mydir/${pair%* *}")
uri=${pair#* *}
emit_message
emit_message " Tested: $uri"
for catalog in $XML_CATALOG_FILES; do
response="$(readlink -f "$(xmlcatalog $catalog $uri| grep -v "No entry")")"
if [ -n "$response" ]; then
if [ "$response" = "$path" ]; then
emit_message " Result: $path"
break
else
emit_message " Result: FAILED"
fi
fi
done
done < $mydir/.urilist
fi
fi
if [ -z "$CLASSPATH" ]; then
emit_message
emit_message "NOTE: CLASSPATH not set. Not testing with Apache XML Commons Resolver."
else
if [ "$(checkForResolver)" ]; then
checkForResolver
else
emit_message
emit_message "Testing with Apache XML Commons Resolver..."
while read pair; do
path=$(readlink -f "$mydir/${pair%* *}")
uri=${pair#* *}
emit_message
emit_message " Tested: $uri"
if [ ${uri%.dtd} != $uri ]; then
response="$(java org.apache.xml.resolver.apps.resolver system -s $uri | grep "Result")"
else
response="$(java org.apache.xml.resolver.apps.resolver uri -u $uri | grep "Result")"
fi
if [ "$response" ]; then
if [ "${response#*$path}" != "$response" ]; then
emit_message " Result: $path"
else
emit_message " Result: FAILED"
fi
fi
done < $mydir/.urilist
fi
fi
}
# get opts and execute appropriate function
case $1 in
*-uninstall)
uninstall $2 $3 $4
;;
*-test)
testCatalogs
;;
*)
main
;;
esac
# Copyright
# ---------
# Copyright 2005 Michael Smith <smith@sideshowbarker.net>
#
# Permission is hereby granted, free of charge, to any person
# obtaining a copy of this software and associated documentation
# files (the "Software"), to deal in the Software without
# restriction, including without limitation the rights to use, copy,
# modify, merge, publish, distribute, sublicense, and/or sell copies
# of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be
# included in all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
# NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
# HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
# DEALINGS IN THE SOFTWARE.
# vim: number
See more files for this project here